Parts

On any surface you can imagine, in any drivetrain configuration, the Rival eTap AXS rear derailleur will handle it. Secure chain management and fast, precise shifting make for a smooth and quiet ride, every time. - Wireless electronic eTap shift logic for intuitive shifting, easy setup, and reliability - Compatible with both 1x and 2x drivetrains - 36T cog max derailleur works with 10-28T, 10-30T, 10-33T, and 10-36T cassettes - SRAM AXS-enabled, allowing easy personalization - Spring clutch keeps the drivetrain quiet and secure - X-SYNC pulleys for increased durability and efficiency - 36T max rear cog - Battery Not Included

The Rival eTap AXS wide front derailleur is optimized for smaller X-Range chainrings on wide cranks and uses Yaw technology so there's no need for trim. Its wider position on the bike also provides clearance for extra wide tires, so you can venture far beyond the beaten path. - Wireless electronic eTap shift logic for intuitive shifting, easy setup, and reliability - For wide cranksets with 43/30T chainrings - Additional clearance for 700x45c and 27.5x2.1" tires - Crisp and accurate front shifts - AXS enabled for easy personalization - Battery Not Included

Original equipment hydraulic hoses for no-compromise brake performance. - Hose Use: Front, Rear - Black - 2000mm hose length - Compatible with SRAM road hydraulic disc brakes

SRAM road disc brake pads are designed for use with SRAM road hydraulic disc brakes (HRD). - For use with Level Ultimate & Level TLM Brakes - Pad Material: Organic - Type: Road/CX - Includes guide pin, clip, & pad spreader

Original equipment hydraulic hoses for no-compromise brake performance. - 2000mm, black

It might look normal from the outside, but the engineering inside this incredible chain design is anything but normal, and it makes possible a gear range previously found only in 2-chainring drivetrains. And it’s also the biggest contributor to the Eagle drivetrain’s ultra-smooth, precise, durable and quiet performance. The Eagle chain’s links have a smooth radius, with no sharp edges or chamfers, which yield a significant reduction in noise, friction and wear on chainrings and cassette cogs. This design also allows for a flatter plate, which means more consistent chain riveting and greater overall strength. HARD CHROME technology extends the chain’s optimal performance life.

A rider's cockpit is a rider's sanctuary and the shifter is at the heart of it. Make any refinement, and it better have been made to elevate performance—the X01 Eagle shifter holds fast to these rules. It features a forged aluminum trigger to hold up better to the demands that X01 Eagle riders ask of their machines, and an enhanced lever feel rolling on sealed cartridge bearings, offering more precision through the range of its movement. - Forged aluminum trigger designed to better take abuse - Enhanced lever feel and precision - X01 Eagle Master colorway matches all cassettes and chains as part of the Eagle Colorsystem

- SRAM's cassette manufacturing technology provides the greatest durability and lightest weight - All-new shifting features create a smoother, quieter system with enhanced inboard and outboard shift performance - XD driver body compatible - Range: 10-50T - Speed: 12 - Cassette Weight: 300g - Cog Details: 10-12-14-16-18-21-24-28-32-36-42-50 - Cassette Spider Material: Steel - Cog Material: Steel/Aluminum

Make that daily ride from your front door a little spicier with some dirt. The 440% range of the XPLR XG-1251 cassette provides smooth gear progression when you're sweating up gravel climbs, and tight jumps on the high end for when it's time to drill it on asphalt. Shift features on each cog are optimized for electronic shifting, so you'll get fast, smooth and precise shifts every time. - X-Range gearing gives you more range and a smoother gear progression, so you're always in the right gear - 440% range gives the coverage 1x gravel riders want - For use with XPLR 1x rear derailleurs - Compatible with Flattop chains - Compatible with XDR driver body - MINI CLUSTER technology for lightweight and durability SPECIFICATIONS: - SPEED (CS): 12s - GEARING: 10-44t - COG FINISH (CASSETTE): Nickle Chrome - TECHNOLOGY (CASSETTE): XG - COG SIZES: 10-44T: 10,11,13,15,17,19,21,24,28,32,38,44

- Superior sealing performance across a wide range of aftermarket applications - Integrated dust sealing lip is designed to guard against dirt and water entering fork preventing contamination and increasing performance - Integrated oil sealing lip preve

- 100% SDG DNA in the design of these pedals - Utilizes a flat profile which allows optimal grip for flat pedal shoes - Composite body design - Minimal 17mm pedal body height maximizes the pedal feel - 105mm x 110mm Platform - Ramped and undercut traction pad - 18 pins, replaceable, bottom loaded - Bearing/bushing design for maximum durability. Fully rebuildable pedal design - Cro-Mo axle

Replacement top caps for various RockShox suspension forks. -32mm steel upper tubes only

RockShox 35mm Seal Kit

Proven time after time to be a reliable, easily adjustable system that continues to outperform the competition, the 4-Axis stem is a surefire go-to for an entry level stem that has world-class performance. - Bar Clamp Diameter: 31.8mm - Material: Alloy - Stem Angle: 30 degrees - S.H.I.S. Stem Clamp Diameter: 28.6

Inspired by those long rides when daylight turns to darkness and back to sunlight, the new Ritchey Mini Sliver clip-on bar offers welcome comfort and a more efficient position. These clip-on bar extensions and pads were designed specifically for off- and on-road ultra-endurance racing and riding. The Mini Sliver features a smaller version of our original padded Sliver clip-on armrests, allowing for less interference with handlebar bags and other accessories. The adjustable alloy bar extensions deliver a comfortable and aero position for successful long-distance gravel racing and pleasant extended bike touring. - Includes two sets of armrest pads - Reversible extensions: 70 or 90mm - Built specifically for ultra-distance riding - Material: aluminum 6061 - Handlebar clamp diameter: 31.8mm - Handlebar clamp width: 16mm - Stack height: 31mm - Reversible and replaceable extensions - Replaceable stick-on pads - Weight: 286g

Race Face bottom brackets for use with 30mm spindle cranksets in the Race Face CINCH crank family. - Compatible with standard threaded BSA shells - Standard 6806 retainer bearings - Includes inner plastic sleeve and spacer; additional BB fitments can be accommodated with CINCH spacer kits - Inner sleeve protects against water - Rubber seal located on the bearing's external side helps to reduce the risk of water penetration

Sealed and Delivered Bottom brackets are something you never think about until you do. With superior sealing and cable routing clearance, our 30mm Cinch BB92 will give you true peace of mind. This bottom bracket stands for precision and and durability. All About The Ball Bearings This BB uses 6806 retainer bearings packed with waterproof grease, along with improved wiper seals to ensure above-and-beyond durability and performance. Death to Creaks We fired up the ol' CNC machine to make sure the anodized alloy cups of this bottom bracket provide an exact, perfectly quiet fit in your frame. Weather, Or Not Features a built-in telescopic sleeve with improved sealing, keeping moisture from bearings and crank spindle. Plus, the sleeve provides more space for internal cable routing.

Riser kits increase stack height to fit a wide range of riding styles for efficient positioning; compatible with ZBS Aerobars, T Plus Carbon Series Aerobars, T Plus Aluminum Series Aerobars, Supersonic Aerobars, Sonic Aerobars, and Subsonic Aerobars. - Multiple kits can be used to reach desired height up to 80mm rise - Raises armrest and extensions together to maintain a comfortable wrist position - Kit includes a pair of risers, bolts specific to riser size, and mounting hardware - Risers are compatible with J2, J3, and J4 Aerobar brackets - Clamp diameter: 31.8mm

Profile Design's F-19 Replacement Pads are the correct ones for their F-19 armrests. These pads feature Lycra-covered medium-durometer foam and are held on with Velcro backing.

Large surface area triathlon or TT aerobar armrest elbow pad with contoured edges to provide support and relieve pressure points. - F-35 Standard replacement pads are 16mm thick, built with moderate thickness to provide comfort in both training and race conditions - Made of EVA foam with anti-bacterial/anti-microbial Lycra cover - Compatible with F-35a Aluminum, F-35c Carbon, F-35i Injected, and F-35 Adjustable Armrests - Weight: 26g/pair

Replacement pads for the F-40 armrest. - F-40 Standard replacement pads are 16mm thick, built with moderate thickness to provide comfort in both training and race conditions - Made of EVA foam with anti-bacterial/anti-microbial Lycra cover

Profile's T2 Wing has a winged cross-section to slice through the air, making this a perfect base bar for triathlons and time trials. Made from double-butted 6061 aluminum, the T2 is super light and boasts a wide clamping section that will accept any Profile clip-on aero bar. Plus, it's shot peened and anodized for added strength and durability.

Profile Design’s Venturi Pads are the correct foam replacement pads for your Profile Design Century Aerobars (sold separately). They have adhesive on the bottom.

Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - 1-1/8" Diameter - S.H.I.S. Stem Clamp Diameter: 28.6mm

These simple clamps allow riders to mount I-Spec II compatible shifters or dropper levers onto their bars without the otherwise-requisite Shimano I-Spec II compatible brake levers. Sold individually and can be used for either right- or left-hand side. - Hinged clamps for easy installation without removing other components - AL-6061, anodized black - 23 grams - For use only with I-Spec II compatible shifters or dropper lever

The Problem Solvers Seatpost Shim is what you need when your seatpost is a little too small-diameter to fit tightly into your frame. It's made of light, durable aluminum and has a lip on the top so it won't slide down inside the frame during installation.

The Problem Solvers Standard Top Cap is a light, durable aluminum top cap for threadless headsets. These caps fit all forks.

- Extruded AL6061 aluminum CNC machined construction - CNC chromoly spindle - Sealed bearing and bushing - One side SPD compatible - Fully adjustable tension - 9/16-inch spindle - 295g pair

- Great for center-pull cantilever brake setups - Fits threadless fork steerer tubes - Includes barrel adjuster - 24mm cable stop drop - AL6061-T6 alloy construction

In-line cable tension adjusters - Indexed fine-tuning allows you to feel each "click" of adjustment and prevents loosening from vibration - Fits cable housing without ferrules